Installing the cushion for the driver's seat backrest
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Correctly place the backrest covering (2) onto the cushion.
- Secure all trim wires (1) with clamps.
- Replace the clamps (2).
Parts: Clamps
- Insert the clamp (2) with the special tool 0 492 668 (52 0 050) .
- Clasp the trim wire (3) of the cushion (1) and the trim wire (4) of the backrest covering with the clamp (2) and bend the clamp (2).
1 Upholstery 2 Clamp 3 Trim wire in cushion 4 Trim wire in backrest covering 5 Backrest covering
Follow-up work
- Refer to INSTALLING THE BACKREST COVERING WITH THE CUSHION .
- Refer to INSTALLING THE SIDE AIRBAG ON THE FRONT SEAT (ELECTRIC SEAT) .
- Refer to INSTALLING TRIM FOR THE HATCH IN THE FRONT SEAT BACKREST .
- Refer to INSTALLING THE INNER COVER ON THE FRONT SEAT .
- Refer to INSTALLING THE OUTER COVER ON THE ELECTRICAL FRONT SEAT .
- Refer to INSTALLING FRONT SEAT .
- Refer to INSTALLING THE FRONT STRAP FITTING .