Installing the backrest width adjustment with valve
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Perform the steps on the left and right side.
- Insert the air cushion (2) from the rear.
- Hook the spring wire (1)
in the backrest frame.
- Replace screws (1)
.
Parts: Screw
- Tighten the screws (1)
on the left and right air cushion (2)
.TIGHTENING TORQUE SPECIFICATIONS
Backrest width adjustment to backrest frame Oval-head screw Replace screw. Tightening torque 1.7 Nm - Feed in the pump (3) .
- Attach the valve unit (2) on the spring wire.
- Connect and lock the plug connections (1) .
- Install the cable ties in the highlighted areas.
Follow-up work
- Refer to INSTALLING THE BACKREST COVER WITH THE CUSHION FOR THE FRONT SEAT .
- Refer to INSTALLING SIDE AIRBAG IN FRONT SEAT .
- Refer to INSTALLING THE REAR PANEL ON THE FRONT SEAT BACKREST .
- Refer to INSTALLING THE INNER COVER ON THE FRONT SEAT .
- Refer to INSTALLING THE OUTER COVER ON THE FRONT SEAT (MECHANICAL) .
- Refer to INSTALLING THE LEVER FOR THE SEAT HEIGHT ADJUSTMENT ON FRONT SEAT .
- Refer to INSTALLING BACKREST ADJUSTMENT LEVER ON FRONT SEAT .
- Refer to INSTALLING GUIDE SLEEVE FOR FRONT HEAD RESTRAINT .
- Refer to INSTALLING THE HEAD RESTRAINT IN FRONT .
- Refer to INSTALLING FRONT SEAT .
- Refer to INSTALLING THE FRONT STRAP FITTING .