Install the backrest cover of the front seat backrest
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Place the backrest cover onto the upholstery.
- Secure all trim wires in marked area with clamps on cushion.
- Replace the clamps (2)
.
Parts: Clamps
- Insert the clamp (2) with the special tool 0 492 668 (52 0 050) .
- Clasp the trim wire (3)
of the cushion (1)
and the trim wire (4)
of the backrest covering (5) with the clamp (2)
and bend the clamp (2)
.
Follow-up work
- Refer to INSTALLING THE BACKREST COVER WITH THE CUSHION FOR THE FRONT SEAT .
- Refer to INSTALLING SIDE AIRBAG IN FRONT SEAT .
- Refer to INSTALLING THE REAR PANEL ON THE FRONT SEAT BACKREST .
- Refer to INSTALLING THE INNER COVER ON THE FRONT SEAT .
- Refer to INSTALLING THE OUTER COVER ON THE ELECTRICAL FRONT SEAT .
- Refer to INSTALLING GUIDE SLEEVE FOR FRONT HEAD RESTRAINT .
- Refer to INSTALLING THE HEAD RESTRAINT IN FRONT .
- Refer to INSTALLING FRONT SEAT .
- Refer to INSTALLING THE FRONT STRAP FITTING .