37 12 310 Replace the shock absorber (VDM) on the rear left or right

WARNING: This page is about a different car, the 2018 BMW 330i and 2017 BMW 330i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

2 355 965
2 355 966

IMPORTANT:

When replacing the shock absorber, replace the auxiliary damper as well.
Read and comply with INFORMATION ON REPLACING SHOCK ABSORBERS.

Necessary preliminary tasks:

Remove the SHOCK ABSORBER

Remove protective cap (1) and sealing washer (2).

Installation note:

Replace the faulty components.

Courtesy of BMW OF NORTH AMERICA, INC.

Release nut (1) with special tool 2 355 965 and 2 355 966.

Tightening torque, refer to: 33 52 2AZ .

Installation note:

Replace nut.

Courtesy of BMW OF NORTH AMERICA, INC.

Impact screwdrivers are prohibited!

Risk of damage inside the shock absorber!

Replace auxiliary damper with protective tube (1).

Courtesy of BMW OF NORTH AMERICA, INC.