33 52 Shock Absorber
WARNING: This page is about a different car, the 2018 BMW 330i and 2017 BMW 330i. However, it is still accessible from the selected car via links, so may be relevant.
33 52 SHOCK ABSORBER - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Nut and locknut/self-locking nut | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M8 | Replace screw. | 28 Nm |
| 2AZ Support bearing on shock absorber | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M10 | Replace nut. | 38 Nm |
| 3AZ Shock absorber to camber arm | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M12 | Replace screw and nut. Tighten down in normal position |
|
| Jointing torque | 100 Nm | |||
| Angle of rotation | 90° |