REP-TAT-P-1711-02 Install radiator
WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
- Insert and install the radiator (1).
- Connect and audibly lock coolant line (1).
- Connect and audibly lock coolant line (1).
- Connect and audibly lock coolant line (2).
- Guide in and install cover (3).
- Tighten down screws (2).TIGHTENING TORQUES SPECIFICATION
Top cooling module cover to cooling module D6x20 6 Nm - Secure the cable (1) at the clamps (Pfeile).
Follow-up work:
- Refer to INSTALLING CENTER FRONT PANEL
- Refer to CONNECTING THE COOLANT HOSE TO THE RADIATOR
- Refer to CONNECTING THE COOLANT HOSE TO THE RADIATOR OF THE LOW-TEMPERATURE COOLANT CIRCUIT
- Refer to INSTALLING FAN COWL
- Refer to INSTALLING CLEAN AIR PIPE
- Refer to INSTALLING INTAKE SILENCER HOUSING
- Refer to INSTALLING THE FRONT UNDERBODY PROTECTION
- Refer to FILLING THE LOW-TEMPERATURE COOLING SYSTEM WITH THE VACUUM FILLER DEVICE
- Refer to FILLING THE HIGH-TEMPERATURE COOLING SYSTEM WITH THE VACUUM FILLER DEVICE
- Refer to BLEEDING THE LOW-TEMPERATURE COOLING SYSTEM
- Refer to BLEEDING THE HIGH-TEMPERATURE COOLANT SYSTEM