REP-TAT-P-1711-02 Install fan cowl
WARNING: This page is about a different car, the 2018 BMW 340i, 2017 BMW 340i, and 2016 BMW 340i. However, it is still accessible from the selected car via links, so may be relevant.
Prerequisite
Ignition is switched off.
- Feed in and install the fan cowl (5) in the direction of the arrow.
The lock (4) must audibly engage.
- Tighten down screw (3).TIGHTENING TORQUES SPECIFICATION
Fan cowl on radiator D6X20 6 Nm - Secure clamps (2).
- Connect and lock the connector (1).
The connector (1) must engage audibly.
Follow-up work:
- Refer to INSTALLING CLEAN AIR PIPE
- Refer to INSTALLING INTAKE SILENCER HOUSING