11 00... Mounting engine on assembly stand (B48B)
WARNING: This page is about a different car, the 2018 BMW 330i xDrive and 2017 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 00 2 300.
- 00 2 320
- 2 288 357.
- 11 9 030
IMPORTANT:
Follow manufacturer's instructions.
Necessary preliminary tasks:
- Remove ENGINE
- Remove RIGHT ENGINE SUPPORT ARM
- Drain off engine oil
Prepare special tool 00 2 300 together with special tool 00 2 320 (00 2 321).
Prepare special tool 2 288 357 together with special tool 11 9 030.
Lift engine with workshop crane onto assembly stand.
Bolt special tools 11 9 030 and 2 288 357 to engine.
Tightening torque: 11 11 5AZ .
Fix special tool 11 9 030 to assembly stand 00 2 300.
Tightening torque: 11 11 6AZ .
NOTE:
Graphic B38.
Required follow-up work:
- Suspend engine from workshop crane
- Remove ENGINE FROM ASSEMBLY STAND
- Install RIGHT ENGINE SUPPORT ARM
- Install ENGINE
- Top up engine oil