11 11 Engine block
WARNING: This page is about a different car, the 2018 BMW 330i xDrive and 2017 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
11 11 ENGINE BLOCK - TIGHTENING TORQUES SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Bearing cap to crankcase (collar screw 11.9) | B46M0/O0/B48M0/O0 | M10x1.5 | Replace screws and screw in hand-tight. | |
| 1. Joining torque | 25 Nm | |||
| 2. Angle of rotation | 60° | |||
| 3. Angle of rotation | 60° | |||
| 2AZ Oil spray nozzle in crankcase | B46M0/O0/B48M0/O0 | M6 | 8 Nm | |
| 3AZ Bearing journal of tensioning and guide rail | B46M0/O0/B48M0/O0 | M8 | Replace bolt. | 20 Nm |
| 4AZ Camshaft wheel with ball bearing to crankcase | B46M0/O0/B48M0/O0 | M12x1.5 | 108 Nm | |
| 5AZ Special tool/holder to crankcase | B46M0/O0/B48M0/O0 | M10x35 | 40 Nm | |
| 6AZ Special tool 11 8 930 to special tool 00 2 300 | B46M0/O0/B48M0/O0 | M14x35 | 160 Nm | |
| 7AZ Chain tensioner to crankcase | B46M0/O0/B48M0/O0 | M6x22 | 10 Nm | |
| 8AZ Spacing screw for acoustic cover on engine block (Key range 17) | B46M0/O0/B48M0/O0 | M8x12 | 12 Nm | |