22 11 100 Replacing right engine support arm

WARNING: This page is about a different car, the 2018 BMW 330i xDrive and 2017 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Secure the ENGINE IN INSTALLATION POSITION .
Remove the REINFORCEMENT PLATE .
Remove right engine encapsulation.

Removal:

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove engine support arm (2).

Installation:

Courtesy of BMW OF NORTH AMERICA, INC.

Install engine support arm (2).

Tighten down screws (1).

Tightening torque, refer to: 22 11 3AZ .

Required follow-up work:

Install right engine encapsulation.
Install the REINFORCEMENT PLATE .