33 52 161 Replacing rear left or right support bearing for spring strut/shock absorber
WARNING: This page is about a different car, the 2018 BMW 330i xDrive and 2017 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 2 355 965
- 2 355 966
Installation note:
- All screws, nuts, bolts and hose clamps removed during the repair must be replaced.
- Retaining elements on chassis and suspension and steering parts must be replaced.
Necessary preliminary tasks:
- Remove the SHOCK ABSORBER .
Remove protective cap (1) and sealing washer (2).
Installation note:
Replace the faulty components.
Use special tools 2 355 965 and 2 355 966 to undo the nut (1).
Tightening torque, refer to: 33 52 2AZ .
Installation note:
Replace nut.
Impact screwdrivers are prohibited!
Risk of damage inside the shock absorber!