33 52 Shock Absorbers
WARNING: This page is about a different car, the 2018 BMW 330i xDrive and 2017 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
33 52 SHOCK ABSORBERS - TIGHTENING TORQUES SPECIFICATIONS
| Type | Thread | Instructions | Torque Specification | |
|---|---|---|---|---|
| 1AZ Nut and locknut/self-locking nut | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M8 | Replace screw. | 28 Nm |
| 2AZ Support bearing on shock absorber | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M10 | Replace nut. | 38 Nm |
| 3AZ Shock absorber to camber arm | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M12 | Replace screw and nut. Tighten down in NORMAL POSITION Jointing torque Angle of rotation |
100 Nm 90° |