Removing and installing/replacing left clean air pipe (S63 B44 T 2) (X6 M)

Necessary preliminary tasks: 

• Remove ACOUSTIC COVER .
• Remove INTAKE SILENCER HOUSING .

Removal: 

Release clamps (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Release ventilation line (1) from clean air pipe.

Pull charge air cooler (3) slightly forward and remove charge air hose (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Disconnect clean air pipe (2) from exhaust turbocharger and remove.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Mount clean air pipe (2) on exhaust turbocharger.

Tighten down screws (1).

Tightening torque 13 71 1AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Install charge air hose (2).

Connect charge air cooler (3) to charge air hose (2).

Connect ventilation line (1) to clean air pipe.

Courtesy of BMW OF NORTH AMERICA, INC.

Replace parts:  clamps (1).

Secure charge air hose with clamps (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Remove ACOUSTIC COVER .
• Remove INTAKE SILENCER HOUSING .