13 71 Intake Silencer (X6 M)
13 71 AIR INTAKE SYSTEM - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Clean air pipe to exhaust turbocharger | N63 B40 O 1/N63 B44 O 1 | M6 | 10 Nm | |
| S63 B44 T 2 | M6 | 10 Nm | ||
| 2AZ Intake filter housing to clean-air pipe | N63 B40 O 1/N63 B44 O 1 | Hose clamp | 3 Nm | |
| S63 B44 T 2 | Hose clamp | 3 Nm | ||
| 3AZ End cover, intake silencer housing | N63 B40 O 1/N63 B44 O 1 | 3.5 Nm | ||
| S63 B44 T 2 | 3.5 Nm | |||
| 4AZ Air filter elements to intake silencer housing | N63 B40 O 1/N63 B44 O 1 | 4 Nm | ||
| S63 B44 T 2 | 4 Nm | |||
| 5AZ Hot film air mass meter to intake silencer | N63 B40 O 1/N63 B44 O 1 | 3.5 Nm | ||
| S63 B44 T 2 | 3.5 Nm | |||
| 6AZ Charge air cooler to engine | N63 B40 O 1/N63 B44 O 1 | M6 | 10 Nm | |
| S63 B44 T 2 | M6 | 10 Nm | ||
| 7AZ Charge air hose for throttle valve and charge air cooler | N63 B40 O 1/N63 B44 O 1 | Screw clamp | 3.5 Nm | |
| S63 B44 T 2 | Screw clamp | 3.5 Nm | ||
| 8AZ Hose to exhaust turbocharger | N63 B40 O 1/N63 B44 O 1 | V-band clamp | 3.5 Nm |