Removing and installing/replacing lower oil sump section (S63T2) (X5 M)

Necessary preliminary tasks: 

• Remove REINFORCEMENT PLATE .
• Drain ENGINE OIL .

Removal: 

Unlock plug connection (1) on oil level sensor and disconnect.

Release screws (2) along line.

Remove lower oil sump section (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Position lower oil sump section (3).

Tighten screws (2) along line.

Tightening torque 11 13 3AZ .

Connect plug connection (1) to oil-level sensor and lock in place.

Courtesy of BMW OF NORTH AMERICA, INC.

Necessary follow-up tasks: 

• Install REINFORCEMENT PLATE .
• Top up ENGINE OIL .