11 13 Oil Pan (X5 M)
11 13 OIL SUMP - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Oil drain plug | S63O 0 | M18 x 1.5 | Replace sealing ring | 40 Nm |
| 2AZ Oil sump upper section to crankcase | S63O 0 | M8 | Replace microencapsulated screws | 27 Nm |
| 3AZ Oil sump, lower section to upper section | S63O 0 | M8 | Replace microencapsulated screws | 27 Nm |
| 4AZ Oil deflector to oil sump upper section | S63O 0 | M6 | 10 Nm | |
| 5AZ Screw plug, oil channel, to oil sump upper section | S63O 0 | M24x1.5 | Replace sealing ring | 50 Nm |
| 6AZ Oil condition sensor to lower oil sump section | S63O 0 | M6 | Replace O-ring | 8.5 Nm |
| 7AZ Oil temperature regulator to oil sump upper part (control valve) | S63O 0 | M33x2 | Replace sealing ring | 100 Nm |