Installing both headlights
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Description is for left component only. Procedure on the right side is identical.
Install headlight
Checking blocking of the horizontal setting
- Insert the headlights (2) .
- Tighten the screws (1)
.TIGHTENING TORQUE SPECIFICATIONS
Headlamp to headlamp bracket M6x35 screw Tightening torque 5 Nm - Tighten down screw (4).TIGHTENING TORQUE SPECIFICATIONS
Headlamp to headlamp bracket M6x35 screw Tightening torque 5 Nm - Tighten down screw (3).TIGHTENING TORQUE SPECIFICATIONS
Headlamp to carrier support extension Multi-purpose hexagon screw with washer Tightening torque 5 Nm - Attach the cable (2) in the latch mechanism.
- Connect connectors (1) and lock.
Follow-up work
- Refer to INSTALLING BUMPER COVER, FRONT .
- Refer to INSTALLING TEMPERATURE SENSOR .
- Refer to PARTIALLY INSTALLING FRONT LEFT AND RIGHT WHEEL ARCH COVER .
- Refer to PARTIALLY INSTALLING THE WHEEL ARCH TRIM ON THE FRONT LEFT AND RIGHT .
- Refer to INSTALLING THE FRONT CENTER HOOD SEAL .
- Refer to INSTALLING HOOD SEAL ON LEFT AND RIGHT SIDES .
- Refer to PROCESSING THE LED HEADLIGHT SERVICE TEST MODULE .
- Refer to ADJUSTING BOTH HEADLAMPS .