Install coolant temperature sensor
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Insert and install the coolant temperature sensor (2).
- Tighten the coolant temperature sensor (2).
TIGHTENING TORQUE SPECIFICATIONS
| Coolant temperature sensor at cylinder head | ||
|---|---|---|
| Sensor | Tightening torque | 18 Nm |
- Connect and lock the connector (1).
- Make sure the connector (1) engages audibly.
- Loosen sealing cap (1).
NOTE:
TECHNICAL INFORMATION
Follow notes for repair work on the cooling system.
For additional information see:
NOTES FOR WORKING ON THE COOLING SYSTEM .
Follow notes for repair work on the cooling system.
For additional information see:
NOTES FOR WORKING ON THE COOLING SYSTEM .
- Adjust coolant level to the maximum mark .
- Shut sealing cap (1).
Follow-up work
- Refer to INSTALLING THE TANK VENT VALVE .
- Refer to INSTALLING INTAKE SILENCER HOUSING .
- Refer to INSTALLING THE INTAKE MANIFOLD FOR THE INTAKE FILTER HOUSING .
- Refer to CONNECTING THE BATTERY EARTH LEAD .