Installing fuel delivery line

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

Guide the fuel delivery line (1) in and install.
Make sure that the rubber damper (2) is positioned correctly.
Tighten the union nut (3) hand-tight.
Hand-tighten the bolts (4).

Courtesy of BMW OF NORTH AMERICA, INC.
Tighten down screws (3).

TIGHTENING TORQUE SPECIFICATIONS

Fuel delivery line to cylinder head cover
M6x18	tightening torque	7 Nm

Tighten union nut (2).

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUE SPECIFICATIONS

Fuel delivery line to high pressure pump
M14	Tightening torque	26 Nm

Connect the fuel line (1) to the fuel supply line (5) and lock.
Ensure that the fuel line (1) audibly engages.
Ensure that the rubber damper (4) is correctly installed.
Insert and install the sound insulation (2).
Connect connectors (1) and lock.
The connector (1) must engage audibly.

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: The following step(s) must be performed if the listed component(s) is/are installed.

Feed in and install cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING ACOUSTIC COVER .
Refer to INSTALLING THE UPPER FIREWALL COVER PANEL .
Refer to INSTALLING THE STRUT BRACE .
Refer to INSTALLING FRONT WINDSHIELD PANEL COVER .
Refer to INSTALLING THE REAR HOOD SEAL .
Refer to CONNECTING THE BATTERY EARTH LEAD .