Install the strut brace

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: TECHNICAL INFORMATION
Driving without the strut brace/front-end strut or tension strut is not permitted.

Install the strut brace (2).
Replace screws (1).
Parts: Screws

Tighten the screws (1).

TIGHTENING TORQUE SPECIFICATIONS

Cross-brace to shock tower
Screw Replace screw.	Joining torque	28 Nm
Screw Replace screw.	Angle of rotation	180°

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Description is for right component only. The procedure on the left side is identical.

Install the cover (3).

Tighten down screw (2).

TIGHTENING TORQUE SPECIFICATIONS

Cover on body
Hexagon screw	Tightening torque	3 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Install the expanding rivet (1).

Follow-up work

Refer to INSTALLING FRONT WINDSHIELD PANEL COVER .
Refer to INSTALLING THE REAR HOOD SEAL .