51 16 365 Removing and installing/replacing glovebox cover

WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks

Remove RIGHT GLOVEBOX WITH HOUSING
Remove DAMPER FOR GLOVEBOX

Release screws (1).

Remove glovebox housing (2).

Fig 1: Identifying Glovebox Housing With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Drive out hinge axle (1) on left and right with a suitable tool.

Remove glovebox cover (2).

Fig 2: Identifying Glovebox Cover And Hinge Axle

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement

Remove GLOVEBOX LOCK