51 16 366 Removing and installing right glovebox with housing

WARNING: This page is about a different car, the 2013 BMW Z4, 2012 BMW Z4, 2011 BMW Z4, 2010 BMW Z4, and 2009 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks

Remove LOWER INSTRUMENT PANEL TRIM

Release screws (1).

Remove lower glovebox trim (2).

Remove side trim (3).

If necessary, remove AIRBAG FRONT PASSENGER KNEE PROTECTION

Fig 1: Identifying Lower Glovebox Trim With Side Trim And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: To be able to show screw position better, graphic shows glovebox cover removed.

Release screws (1).

Remove glovebox (2).

Fig 2: Identifying Lower Glovebox Trim With Screws

Courtesy of BMW OF NORTH AMERICA, INC.