52 25 037 Removing and installing/replacing rear seat frame

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove BACKREST FRAME .
Remove RIGHT BACKREST COVER .

Remove plate (1).

Release screw (2).

Tightening torque 52 25 08AZ .

Remove trim (3) in direction of arrow.

Fig 1: Removing Right Rear Seat Backrest Frame Trim

G08486953

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 52 25 08AZ .

Remove trim in direction of arrow.

Fig 2: Removing Rear Seat Backrest Frame Screws

G08486954

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 52 25 04AZ .

Lift out backrest.

Fig 3: Identifying Rear Seat Backrest Screws

G08486955

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement only:

Remove CONTROL UNIT for seat heating.
REMOVE seat belt buckle.