72 11 295 Removing and installing/replacing rear right lower strap (seat belt buckle)
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove left REAR SEAT
Installation note:
- Microencapsulated screws (Loctite) must be replaced and may not be reused
- Screw connection must be completed within 20 minutes (start of curing)
- Microencapsulated screws must not be retightened
- Clean thread of nut beforehand in event of repeated use
Detach cover (1).
Release screw (2).
Tightening torque 52 26 08AZ .
Pull folding cover forward and lift up to remove.
Release screw (1).
Installation note:
Replace screw (1).
Tightening torque 72 11 22AZ .
Remove seat belt buckle.
Installation note:
Seat belt buckle is coded to prevent incorrect installation.