LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 714 (Automatic Transmission - Repair) >> Gearshift >> 24 50 021 Replacing emergency release

24 50 021 Replacing emergency release

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.

The emergency release is discontinued for GA8HP transmissions:

Necessary preliminary tasks: 

Release screw (2).

Remove cable (1).

Installation note: 

Adjust GEARSHIFT LEVER .

Fig 1: Identifying Screw, Cable And Lever
G08487991Courtesy of BMW OF NORTH AMERICA, INC.

Slacken nut (1).

Tightening torque 24 51 2AZ .

Release cable from pipe clamp (2).

Fig 2: Identifying Pipe Clamp And Nut
G06889529Courtesy of BMW OF NORTH AMERICA, INC.
NOTE:
  • Reinstall transmission support bracket and transmission cross member
  • Lower vehicle

Unscrew nuts (1).

Remove the emergency release (2) upwards.

Fig 3: Identifying Nuts And Transmission Support Bracket
G06889530Courtesy of BMW OF NORTH AMERICA, INC.