22 32 055 Removing and installing/replacing transmission bearing block

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Replace RUBBER MOUNT for transmission mounting

Remove transmission support block from transmission.

Installation note:

Tightening torque 22 32 1AZ .

Fig 1: Identifying Transmission Bearing Block Screws

Courtesy of BMW OF NORTH AMERICA, INC.