61 31 336 Removing and installing/replacing cover for gear selector switch

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Disconnect NEGATIVE BATTERY CABLE .
Remove both negative battery cables atF03
Remove CENTER CONSOLE COVER

NOTE: Trim for gear selector switch (2) is secured from version 04/2009 with four screws.

Release screws (1) and raise trim for gear selector switch (2) slightly.

Unlock and disconnect plug connection underneath for EMF switch.

Twist cover for gear selector switch (2) 90° and feed out upwards from the gear selector switch.

Fig 1: Identifying Gear Selector Switch With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Remove EMF SWITCH .