52 25 036 Removing and installing/replacing left rear seat frame

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks

REMOVE backrest frame.
REMOVE LEFT BACKREST COVER .

Remove plate (1).

Release screw (2).

Tightening torque 52 25 08AZ .

Remove trim (3) in direction of arrow.

Fig 1: Removing Backrest Frame Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 52 25 08AZ .

Remove trim in direction of arrow.

Fig 2: Removing Backrest Frame Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 52 25 04AZ .

Lift out backrest.

Fig 3: Identifying Backrest Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement only:

Remove CONTROL UNIT FOR SEAT HEATING .
REMOVE seat belt buckle.