72 11 294 Removing and installing/replacing lower belt (seat belt buckle), rear left
WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks
- Remove left REAR SEAT .
Installation:
- Microencapsulated screws (Loctite) must be replaced and may not be reused.
- Screw connection must be completed within 20 minutes (start of curing).
- Microencapsulated screws must not be retightened.
- Clean thread of nut beforehand in event of repeated use.
Release screw (1).
Installation:
Replace screw (1).
Tightening torque, see 72 11 22AZ. .
Remove seat belt buckle.
Installation:
Seat belt buckle is coded to prevent incorrect installation.