51 43... Removing and installing/replacing trim for rear roof pillar (D-pillar), left or right

WARNING: This page is about a different car, the 2013 BMW 550i GT, 2012 BMW 550i GT, 2011 BMW 550i GT, and 2010 BMW 550i GT. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 325

Necessary preliminary tasks

Remove TRIM ON C-PILLAR AT BOTTOM .
Remove CAPPING PANEL .

Detach expanding rivet (2) from trim panel (1).

Fig 1: Identifying Trim Panel And Rivet

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip and remove trim panel (1) from roof frame at marked locations using special tool 00 9 325 .

Fig 2: Removing Trim Panel From Roof Frame Using Special Tool (00 9 325)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Clips (2) must not be damaged.

Replacement

Modify clip (2) of trim panel (1).

Fig 3: Identifying Trim Panel And Clip

Courtesy of BMW OF NORTH AMERICA, INC.