63 12 010 Removing and installing (replacing) left headlight (LED technology)

Necessary preliminary tasks:

NOTE: If the retaining clip (2) is present, the central connector on the headlight cannot be disconnected!

Release screw (1) and remove retaining clip (2) if necessary.

Fig 1: Identifying Retaining Clip And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock and remove cover (1).

Fig 2: Removing Left LED Fan Left Cover (Outer)

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Work shown on the F30 by way of example, deviations in detail are possible in other models.

Fig 3: Identifying Headlight Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

Unfasten screws (2).

Tightening torque 63 12 1AZ .

Release screw (3).

Tightening torque 63 12 1AZ .

Release screw (1).

Tightening torque 63 12 1AZ .

Carefully remove headlight (2) in direction of arrow.

Fig 4: Removing Headlight

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Correctly align the headlight to the holder (2).

Fig 5: Identifying Headlight Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Rubber plugs (1) in engine compartment lid (2) must not be missing or damaged.

No cavity preservation may emerge from the rubber plugs (1).

Fig 6: Identifying Engine Compartment Lid And Rubber Plugs

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: