63 11 800 Replacing left LED main light module left

Attention!

Read and comply with notes on protection against electrostatic damage (ESD PROTECTION) .

Necessary preliminary tasks:

Release screws (1).

Tightening torque 63 11 1AZ .

Remove LED main light module (2) from headlight (3).

Fig 1: Identifying Headlight LED Main Light Module And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Gasket (1) for LED main light module (2) must not be damaged and must be installed free from grease.

Make sure LED main light module (2) is correctly installed.

Fig 2: Identifying LED Main Light Module And Gasket

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: