33 52 161 Replacing rear left or right thrust bearing for spring strut/shock absorber
WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
Installation note:
- All screws, nuts, bolts and hose clamps removed during the repair must be replaced.
- Retaining elements on chassis and suspension and steering parts must be replaced.
Necessary preliminary tasks:
- Remove rear shock absorber. See REPLACING REAR SHOCK ABSORBER or REPLACING REAR SHOCK ABSORBER (ADAPTIVE M SUSPENSION) .
Slacken nut (1).
Remove disc (2) and support bearing (3).
Installation note:
Replace self-locking nut.
Tightening torque 33 52 1AZ .