61 31 336 Removing and installing/replacing cover for gear selector switch

WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Disconnect NEGATIVE BATTERY CABLE
Remove both negative battery cables atF03
Remove CENTRE CONSOLE COVER

NOTE: Trim for gear selector switch (2) is secured from version 04/2009 with four screws.

Release screws (1) and raise trim for gear selector switch (2) slightly.

Unlock and disconnect plug connection underneath for EMF switch.

Twist cover for gear selector switch (2) 90° and feed out upwards from the gear selector switch.

Fig 1: Identifying Gear Selector Switch With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Remove SWITCH FOR ELECTROMECHANICAL PARKING BRAKE .