LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> 535i GT >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Body Equipment - Repair >> Hinged Window >> 51 36 071 Replacing rear left or right side window >> Necessary preliminary work

Necessary preliminary work

IMPORTANT: Risk of damage!
Tape off body in area of piercing point with fabric adhesive tape.
Moisten TPE spray-coating with water so that cutting wire can slide between body and side window and TPE spray-coating is not damaged.
Fig 1: Identifying Fabric Adhesive Tape Applying Area On Body
G08422141Courtesy of BMW OF NORTH AMERICA, INC.

Push wire starter from Roll Out 2000 at line (1) through adhesive bead.

Feed in cutting wire, secure special tool 51 3 270 and cut through adhesive bead in direction of arrow.

Remove side window and replace.