LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2013 >> 535i GT >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Body Equipment - Repair >> Floor-Luggage Compartment-Engine Compartment Trim Panels >> 51 47 315 Removing and installing / replacing front carpet for passenger compartment

51 47 315 Removing and installing / replacing front carpet for passenger compartment

Necessary preliminary tasks 

Cut out carpet (1) along heater box.

IMPORTANT: Choose cut so that center console conceals cutting edge after installation. Do not damage any cables or air ducts when cutting.

Remove carpet (1) toward rear/top and if necessary feed out cable.

Fig 1: Removing Underbody Protection From Bumper Trim
G08486101Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Cutouts (1) serves as locators when installing carpet (2).

Replacement 

Modify footrest, driver's side.

Fig 2: Identifying Speaker With Screws
G08486102Courtesy of BMW OF NORTH AMERICA, INC.

Unclip footwell net (1) on front passenger side.

Fig 3: Removing Bottom Trim On C-Pillar
G05478001Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

If necessary, replace damaged retaining clips.

Fig 4: Identifying Cover And Clips
G05478002Courtesy of BMW OF NORTH AMERICA, INC.