51 43 075 Removing and installing/replacing side trim panel, footwell, on A-pillar, right

Necessary preliminary work 

• Remove DOOR SILL COVER STRIP, FRONT (INSIDE)  right.
• Remove dashboard trim at bottom  . 

Detach edge protection (1) in area of side trim (3).

Release clips (2) in direction of arrow.

Pull out side trim panel (3) from carpet.

Installation note: 

Clips (2) for side trim panel trim (3) must not be damaged.

Fig 1: Identifying Trim Panel And Clip

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement 

Modify clips (2) for side trim panel (1).

Fig 2: Removing Sealing Cap Using Special Tool (00 9 340)

Courtesy of BMW OF NORTH AMERICA, INC.