67 62 020 Removing and installing/replacing flat motor for rear left or right power window lifter

WARNING: This page is about a different car, the 2016 BMW Z4, 2015 BMW Z4, and 2014 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove rear left or right POWER WINDOW UNIT

Release screws (1) on power window unit (2).

Tightening torque 67 62 1AZ .

Fig 1: Identifying Screws On Power Window Unit

Courtesy of BMW OF NORTH AMERICA, INC.

Detach flat motor for power window unit (2) from power window unit (1).

Installation:

Initialize POWER WINDOW .

Fig 2: Identifying Flat Motor For Power Window Unit

Courtesy of BMW OF NORTH AMERICA, INC.