41 00... 0 Contents Of Body Repair General Information
WARNING: This page is about a different variant/trim than selected.
General notes
- Quality standard . See 4100... QUALITY STANDARD or 4100... REPLACEMENT PARTS STANDARDS
Safety regulations
- SAFETY AT WORK
- Information on VEHICLE PROTECTION
Material/new part
- USE OF MATERIALS in outer shell
Handling components after an accident
- ELECTRICAL SYSTEM , electronics and fibre optics
- Passive safety . See 4100... HANDLING AIRBAGS AND RESTRAINT SYSTEMS or 7212... PROCEDURE AFTER AIRBAG DEPLOYMENT AS RESULT OF AN ACCIDENT
- CHASSIS, SUSPENSION AND STEERING
- Retractable hardtop
- Vehicles with hybrid/electric drive
- Seats/seat belts . See 7211... CHECK LIST FOR AUTOMATIC SEAT BELT or 7211... CHECKING AUTOMATIC SEAT BELT
- WHEEL RIM REPAIRS
- HEADLIGHT REPAIRS
Body dimensions
Cavity sealing
- Installation of shaped parts . See 4100... INSTALLING CAVITY SEALING (EXPANDED) , 4100... INSTALLING CAVITY SEALING (NOT EXPANDED) or 4100... INSTALLING A CAVITY SEALING WITH 2-COMPONENT PU CAVITY FOAM
- POSITION OF SHAPED PARTS
Vehicle identification number
Repair method
BMW/MINI/BMW i
- Replacement of screwed-on components
BMW/MINI/BMW i
- Repairs to outer skin
BMW/MINI
- Bonding and riveting
- Welding using a MAG welder
- without straightening bench
BMW i
- Repairs to life module
- Repairs to drive module
- without straightening bench
BMW/MINI
- Bonding and riveting
- Welding using a spot welding system
- with a straightening bench
BMW i
- Repairs to life module
- Repairs to drive module
- with a straightening bench
Corrosion protection
Paint
- GENERAL INFORMATION
- INFORMATION/WARNING LABELS
- Separate component and sectional paintwork