51 32 160 Remove and install/replace housing cover on inner left or right side window frame

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

IMPORTANT: Risk of damage!
Cover (2) must not be kinked.

If necessary, feed out cable (1) and disconnect plug connection.

Lever cover (2) out of retainers (3).

Unclip cover (2) in direction of arrow and remove.

Fig 1: Identifying Retainers And Lever Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Following parts of cover (3) must not be damaged or missing:

Replacement:

If necessary, remove SPEAKER .

Fig 2: Identifying Cover

Courtesy of BMW OF NORTH AMERICA, INC.