54 12... Replacing complete glass slide/tilt sunroof frame
WARNING: This page is about a different variant/trim than selected.
IMPORTANT:
It is absolutely essential to follow the work steps in the order specified (risk of damage).
Necessary preliminary tasks
- Remove WIND DEFLECTOR
- Remove GAITER
- Remove GLASS SLIDE/TILT SUNROOF LID
- Remove ROOF LINER
- Remove DRIVE UNIT WITH GEARING
- Remove COMPLETE GLASS SLIDE/TILT SUNROOF
- Remove RAIN CHANNEL
- Remove HEADLINER
Installation:
Follow the installation sequence from work steps 8 to 1.
Perform the following operations between work steps 3 and 2:
- Adjusting GLASS SLIDE/TILT SUNROOF LID .
- INITIALIZE glass slide/tilt sunroof.