54 12... Replacing complete glass slide/tilt sunroof frame
WARNING: This page is about a different variant/trim than selected.
IMPORTANT:
It is absolutely essential to follow the work steps in the order specified (risk of damage).
Necessary preliminary tasks
- Remove WIND DEFLECTOR .
- Remove GAITER .
- Remove GLASS SLIDE/TILT SUNROOF LID .
- Remove ROOF LINER .
- Remove DRIVE UNIT WITH GEARING .
- Remove COMPLETE GLASS SLIDE/TILT SUNROOF .
- Remove RAIN CHANNEL .
- Remove HEADLINER .
Installation:
Follow the installation sequence from work steps 8 to 1.
Perform the following operations between work steps 3 and 2:
- Adjusting GLASS SLIDE/TILT SUNROOF LID .
- INITIALIZE glass slide/tilt sunroof.