66 54 010 Remove And Installing Complete Night Vision Camera (From 03/2007)

WARNING: This page is about a different car, the 2007 BMW M5, 2007 BMW 550i, 2006 BMW M5, and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT:

Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION)

Necessary preliminary tasks:

Remove FRONT BUMPER TRIM
Remove impact absorber in working area

Drill out rivets (1).

Fig 1: Identifying Rivets

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Secure night vision camera (1) against falling down.

Disconnect hose connection (2) and unclip cable fastener (3).

Tightening torque: 66 54 1AZ . See NIGHT VISION CAMERA for specs.

Fig 2: Identifying Night Vision Camera, Hose Connection And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT:

Secure night vision camera (1) against falling down.

Disconnect hose connection (2) and unclip cable fastener (3).

Fig 3: Identifying Night Vision Camera, Hose Connection And Cable Fastener

Courtesy of BMW OF NORTH AMERICA, INC.

After installation:

Fill up with washer fluid

Replacement only:

Replace NIGHT VISION CAMERA