52 30 080 Removing and Installing/Replacing Left Seat Backrest Frame
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove 3rd seat row. See 52 30 000 Removing and Installing Complete 3Rd Seat Row .
- Remove backrest cover. See 52 30 413 Removing and installing/replacing backrest cover for left or right rear seat .
- Removing actuating mechanism for rear seat backrest. See 52 30 303 Removing and Installing/Replacing Actuating Mechanism For Rear Seat Backrest .
- Remove outer trim. See 52 30 .. Removing and Installing Outer Trim For 3Rd Seat Row .
Detach Starlock washer (1) from shaft.
Remove shaft.
Installation:
Detach Starlock washer (1) from shaft. Remove shaft. Installation: Fit left and right plastic sleeves on shaft.
Release fitting screws (1).
Tightening torque: 52 30 02AZ. . See 52 30 3RD SEAT ROW
Release outer bearing screw (1).
Tightening torque: 52 30 03AZ. See 52 30 3RD SEAT ROW
Remove seat backrest frame (2) from assembly frame.
Replacement only:
- Removing seat fabric. See 52 30 405 Removing and Installing/Replacing Seat Cover For Left Or Right Rear Seat .