LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1436 (Seats - Repair) >> 30 3rd Seat Row >> 52 30 000 Removing and Installing Complete 3rd Seat Row

52 30 000 Removing and Installing Complete 3rd Seat Row

WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Unclip cover (1) on left and right and remove in direction of arrow.

Installation: 

Replace faulty cover.

Release screws (1).

Tightening torque 52 30 01AZ. See 52 30 3RD SEAT ROW

Access to front screw (2) concealed by trim (1).

Unclip trim (1) towards top.

Release screws (2) and (3).

Tightening torque 52 30 01AZ. . See 52 30 3RD SEAT ROW

Fold rear seat backwards forwards.

Release screws (1).

Tightening torque 52 30 01AZ. See 52 30 3RD SEAT ROW

Unlock plug connection (1) and disconnect. See 72 12 .. UNLOCKING/LOCKING AIRBAG PLUG CONNECTIONS

IMPORTANT: Risk of damage! Cover sill and entrance area with protective covers.

Unlock plug connection (1) and disconnect. Important! Risk of damage! Cover sill and entrance area with protective covers. Lift rear seat with a 2nd person helping out of vehicle.