51 23 215 Removing And Installing/Replacing Cable For Hood/Bonnet Locks (To Locks)
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2008 BMW 760Li, 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 760Li, and 2007 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Disconnect BOWDEN CABLE AT CONNECTION POINT
- Release Bowden cables on hood/bonnet lock on left/right
See REMOVING AND INSTALLING/REPLACING RIGHT ENGINE HOOD LOCK and REMOVING AND INSTALLING/REPLACING LEFT HOOD/BONNET LOCK .
N62 only:
- Remove design cover
Feed connecting cable (1) out of cross-member (2) inwards.
Feed cable (3) out of cross-member (2) and side panel.