51 23 110 Removing And Installing/Replacing Left Hood/Bonnet Lock

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2008 BMW 760Li, 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 760Li, and 2007 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove left headlight.
See REMOVING AND INSTALLING/REPLACING LEFT HEADLIGHT (FROM 03/2005) , REMOVING AND INSTALLING/REPLACING LEFT HEADLIGHT (UP TO 03/2005) , or REMOVING AND INSTALLING LEFT HEADLIGHT (XENON HEADLIGHT) .

Disengage Bowden cable (1 and 2) from hood/bonnet lock (3).

Fig 1: Identifying Bowden Cable And Hood/Bonnet Lock

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove hood/bonnet lock (2) towards front.

Tightening torque: 51 23 2AZ . See HOOD/BONNET LOCKS for specs.

Installation:

If necessary, adjust ENGINE HOOD/BONNET .

Fig 2: Identifying Hood/Bonnet Lock

Courtesy of BMW OF NORTH AMERICA, INC.