61 31 005 Removing and installing/replacing fixture for steering column stalk
WARNING:
Do not under any circumstances twist the cover (1) out of its centered position against the fixture for the steering column stalk (2).
When removed, the cover (1) of the fixture for the steering column stalk (2) is secured against turning/twisting by the lock (3).
Necessary preliminary tasks:
- Disconnect battery negative lead (See 61 20 900 DISCONNECTING AND CONNECTING BATTERY NEGATIVE LEAD )
- Remove steering wheel (See 32 33 001 REMOVING AND INSTALLING/REPLACING STEERING WHEEL )
- Remove steering column cover (See 32 31 003 REMOVING AND INSTALLING/REPLACING UPPER SECTION OF STEERING COLUMN TRIM and/or 32 31 020 REMOVING AND INSTALLING/REPLACING LOWER SECTION OF STEERING COLUMN TRIM )
Release screws (1).
Pull back fixture for steering column stalk (2).
Unlock associated plug connections and disconnect.
Remove fixture for steering column stalk (2).
Replacement:
Remove turn indicator/headlight dipping stalk. (See 61 31 016 REMOVING AND INSTALLING/REPLACING TURN INDICATOR/HEADLIGHT DIPPING SWITCH )
Remove stalk for windshield wipers. (See 61 31 040 REMOVING AND INSTALLING/REPLACING SWITCH FOR WINDSCREEN WIPERS )