32 31 020 Removing and installing / replacing lower section of steering column trim

Necessary preliminary tasks:

Move steering column into "upper" and "extended" position
Remove steering wheel

Release screw.

Open adjusting lever.

Detach panel in rear area downwards and unclip.

Fig 1: Locating Panel In Rear Area Downwards And Unclip

Courtesy of BMW OF NORTH AMERICA, INC.

Move plastic wedge from front between upper and lower sections. Press lock (1) on left and right out of hook (2). Pull off lower section of steering column cover towards bottom.

IMPORTANT: Do not scratch steering column cover.
Do not damage locks.

Fig 2: Locating Look And Left And Right Out Of Hook

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Locks (1) must snap into place in hooks (2) on left and right.

Fig 3: Identifying Looks And Hooks

Courtesy of BMW OF NORTH AMERICA, INC.