65 83 010 Removing and installing/replacing Car Communication Computer
WARNING: This page is about a different variant/trim than selected.
IMPORTANT:
Read and comply with Notes On Protection Against Electrostatic Damage (ESD Protection)
.
Necessary preliminary tasks:
- Disconnect Battery Negative Lead
- Remove Operator Unit For Heater/Air Conditioner
- Remove Center Console Switch Center
NOTE:
Comply with notes and instructions on Handling Optical Waveguides
.
Release screws (1).
Pull back Car Communication Computer (2) slightly.
Unlock associated plug connections and disconnect.
Remove Car Communication Computer (2).
Replacement:
Carry out programming/coding.